Recently Viewed

Hoser Hydration System

Hoser Hydration System
  Zoom
Our Price:  £20.99
List Price:  £23.99
Saving Of:  £3.00 (13%)
(Inc. 20% VAT)
Earn 20 Loyalty Points
Size:  

Product Code:  PB101
Brand:  Platypus

 

Made with the same welded plastic laminate as Platypus bottles. Hosers are water reservoirs with a drinking tube assembly that will sit any way up in your pack or in the hydration sleeve if you have one.

Tough, durable, light, flexible and due to the plastic laminate, will slip easily into tight corners in the pack, unlike simialr 'sticky' rubber products. 1 litre, 1.8 litre and 2 litre versions available.

1 litre - £15.99
2 litre - £17.99

How do I clean my Platypus?
The easiest and fastest way is to use a sterilising fluid such as 'Miltons' available from any supermarket or chemist. (This is normally used for baby utensils) Mix it 2.5 litres of water to 5ml (half a capful) in a bowl. Submerge the Platypus and hose and ensure liquid gets into all the air caps. Leave submerged under an upturned plate for 15 mins, a quick rise and it is now clean! Or just make up the mix and pour it in and leave it!

How do I boil my Platypus?
Do not microwave the Platypus. Place in a large pot and cover with water, keeping an eye on pressure building up in Platypus. Do not let the Platypus touch the metal or it will melt.

How do I freeze my Platypus?
Lay half-full Platypus on its side in freezer. If used in a first aid situation wrap the frozen Platypus in a towel before laying against the skin.

My bit vavle comes off to easily. What should I do?
Pull off Bite Valve, cut 3cm off the tube, wet it with your lids and slide Bite Valve back on. There should now be a good seal.

How do I prevent the water in my drinking tube and bite valve from freezing in the cold weather?
The simplest way to prevent water freezing in the tube is the 'blow' it back into the main container. Water in an exposed tube will freeze very quickly, so this simple method keeps the liquid (hopefully) inside the hydration compartment.

Home made bite valve cap idea
Take an old 35mm plastic film canister, drill a 10mm hole in the bottom, sllde the tube through it and put the cap on top. You'll never have to suck a muddy Bite Valve again! Easy!

 

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Great product and service
25 October 2014  | 

I simply wanted a well made hydration bladder which wasn't unecessarily heavy and over engineered like many on the market. The Platypus is exactly what I was looking for and was delivered promptly and well packaged from Backpackinglight

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.

Related Products
4 Litre Water Tank

£36.99   £31.99

Bite Valve Cover

£9.99   £8.49

Drink Tube Kit

£18.99   £17.99